Free Shipping

AIMS Power 5000 Watt Power Inverter UK Plug 230 Volt European 12 Volt This 5000 watt 12 volt power inverter by AIMS Power converts DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to run practically any household appliances or tools. This unit produces a modified sine wave, which is capable of running most tools, pumps, motors and appliances. Use this product for off-grid back-up power at home, cabin, boat, larger solar systems or anywhere that doesn't have city power. What really makes this 5000 watt AIMS Power inverter special is its capability to run off of most vehicles' and/or RVs'/boats' standard power systems at 12 volts. That makes the inverter very attractive to mobile business owners since users don't have to modify a vehicle's standard power system in order to run the inverter off of a car or truck. This definitely saves some money if upgrading a fleet of vehicles with some aftermarket equipment that requires this much power. Some of the popular mobile business applications include powering a small mobile office or kitchen, running tools on a work truck or construction vehicle, or supplying electricity to lawn maintenance equipment. The biggest incentives for business owners to use inverters for electricity include the fact that they make little-to-no noise, making for a more peaceful environment for customers, and that they're non-polluting, which makes for a great green-energy marketing campaign. The 200 percent surge capabilities of this unit should only be used as a safety feature. Other safety features include over-temperature and over-load LED indicators that are used as a warning system for the operator. Also on the AC side of the unit are the battery voltage and amperage meters which display the usage levels of your battery bank. This inverter is equipped with dual cooling fans and over-temperature protection that keeps it from overheating. Features: 5000W max continuous power Modified sine wave Volt meter on front panel to monitor your battery voltage Amp meter on front panel to monitor your current use (rate at which battery is drained) AC Direct Connect Terminal! Over Temperature LED indicator Over Load LED indicator Dual ac receptacle UK Type G 3 prong On/off switch Over Temperature protection Over Load protection Single cooling fan operation thermally controlled Internally fuse protected ac output short circuit protection Auto reset on most fault conditions Aluminum case for optimal cooling Pre-wired for remote on/off switch Pre-slotted mounting plate Instruction manual Free 1 year tech support 1 Year Warranty Parts and Labor Specifications: Continuous output power: 5000 Watts Surge power capability (peak power): 10000 Watts dc input / operating voltage: 10 to 15 Volts Output voltage: 220 / 230 Volts ac +/- 10% Output wave form: modified sine wave with phase correction Output frequency: 50 Hz +/- 1 Hz Battery low voltage alarm: 10.5 +/- 0.5 Volts Battery low voltage shutdown: 10.0 +/- 0.5 Volts No load current: < 0.6 Amps Full load efficiency: 90% 1/3 load efficiency: 95% No load minimum operating temperature: -15 degrees Celsius Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown) AC Output Socket Type: dual Type G 3 prong UK High input voltage protection: 15V-17V Low input voltage shutdown: 10V Internal fuse protection Product size (L x W x H): 16.92"X 7.95"X 6.1" Weight: unit 18 lbs boxed 20 lbs

AIMS Power 400 Watt Power Inverter UK Plug 230 Volt European with Cables 12 Volt Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances. The waveform produced by a Modified Sine Wave Power Inverter is "blocky" resembling a set of steps whereas the waveform produced by utility companies is smooth much like a curvy road. Therefore because of the type of waveform the Modified Sine Wave Power Inverters produce they are suitable for most applications. Modified Sine Wave Power Inverters are more efficient in converting battery power to AC. So if you're looking to make a pot of coffee run a heater or air conditioner or appliances that can withstand occasional electrical noise a Modified Sine Wave Inverter is a cost-effective solution. To select the right inverter first determine what devices you would need to run in the event of a power outage. Then select the appropriate inverter that can carry the combined wattage requirements of these devices. Some appliances have a start up amperage. To see a list of average start up requirements see our Technical Support section on the left nav bar of our website. At AIMS you'll discover our inverters range from 75 watts up to 12000 watts - more than enough to power nearly every application imaginable. /This 400 watt inverter is ideal for small devices. Features: 400W continuous power Modified sine wave Green LED on front panel to confirm power on Red LED on front panel to warn of a faulty condition UK Plug type G 3 prong On/off switch Over Temperature protection Over Load protection Includes cigarette lighter connection with built in fuse(To protect the vehicles wiring, the vehicles cigarette lighter adapter can only handle 180 watts, Isolated ground neutral AC output short circuit protection Aluminum case for optimal cooling Instruction manual Free 1 year tech support 1 Year Warranty Parts and Labor Specifications: Continuous output power: 400 Watts Surge power capability (peak power): 800 Watts dc input / operating voltage: 10 to 16 Volts Output voltage: 220/230 Volts AC - European/African Output wave form: modified sine wave Output frequency: 50 Hz Battery low voltage alarm: 10.5 +/- 0.5 Volts Battery low voltage shutdown: 10.0 +/- 0.5 Volts No load current @ 12V: 1 amp Full load efficiency: 90% 1/3 load efficiency: 95% Operating temperature: -10 to 40 C AC Output Socket Type: UK Plug type G 3 prong High input voltage protection: 16 +/- 0.5 Low input voltage shutdown: 10.6V +/- 0.3 Product size (L x W x H): 7.0"X 5.0"X 2.13" Unit Weight: 2 lb Boxed Weight: 3 lb

AIMS Power 2500 Watt Power Inverter UK Plug 230 Volt European 12 Volt This 2500 watt 12 volt power inverter by AIMS Power converts DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to run practically any household appliances or tools. This is a European, UK model 230V. It will not work with US 120 volt equipment. This unit produces a modified sine wave, which is capable of running most tools, pumps, motors and appliances. Use this product for off-grid back-up power at home, cabin, boat, or anywhere that doesn't have city power. Features: 2500Watt max continuous power 12 Volt Power Inverter Modified sine wave Volt meter on front panel to monitor your battery voltage Amp meter on front panel to monitor your current use (rate at which battery is drained) Over Temperature LED indicator Over Load LED indicator UK Plugs type G 3 prong On/off switch Over Temperature protection Over Load protection Single cooling fan operation thermally controlled Internally fuse protected ac output short circuit protection Auto reset on most fault conditions Aluminum case for optimal cooling Pre-wired for remote on/off switch Pre-slotted mounting plate Instruction manual Free 1 year tech support 1 Year Warranty Parts and Labor Specifications: Continuous output power: 2500 Watts Surge power capability (peak power): 5000 Watts dc input / operating voltage: 10.5 to 17 Volts Output voltage: 230 Volts ac +/- 10% Output wave form: modified sine wave with phase correction Output frequency: 50 Hz +/- 1 Hz Battery low voltage alarm: 10.5 +/- 0.5 Volts Battery low voltage shutdown: 10 +/- 0.5 Volts No load current: < 0.2 Amps Full load efficiency: 90% 1/3 load efficiency: 95% No load minimum operating temperature: -15 degrees Celsius Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown) UK Plug type G 3 prong High input voltage protection: 17 volts Low input voltage shutdown: 10 volts Internal fuse protection Product size (L x W x H): 14.5"X 6.5"X 3.0rdquo; Weight: unit 10 lbs boxed 12 lbs

AIMS Power 1250 Watt Power Inverter UK Plug 230 Volt European 12 Volt This 1250 watt 12 volt power inverter by AIMS Power converts DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to run practically any small household appliances or tools. This unit produces a modified sine wave, which is capable of running most tools, pumps, motors and appliances. Use this product for off-grid back-up power at home, cabin, boat, solar systems or anywhere that doesn't have city power. . This is a European UK model. Will not work with 120 volt US power. What really makes this 1250 watt AIMS Power inverter special is its capability to run off of most vehicles' and/or RVs'/boats' standard power systems at 12 volts. That makes the inverter very attractive to mobile business owners since users don't have to modify a vehicle's standard power system in order to run the inverter off of a car or truck. This definitely saves some money if upgrading a fleet of vehicles with some aftermarket equipment that requires this much power. Some of the popular mobile business applications include powering a small mobile office or kitchen, running tools on a work truck or construction vehicle, or supplying electricity to lawn maintenance equipment. The biggest incentives for business owners to use inverters for electricity include the fact that they make little-to-no noise, making for a more peaceful environment for customers, and that they're non-polluting, which makes for a great green-energy marketing campaign. Features: 1250W max continuous power Modified sine wave Volt meter on front panel to monitor your battery voltage Watt meter on front panel to monitor your Isolated ground neutral LED (green/red) indicator that monitors ready or fault UK Plug type G 3 prong On/off switch Over Temperature protection Over Load protection Dual cooling fan operation thermally controlled Internally fuse protected AC output short circuit protection Auto reset on most fault conditions Aluminum case for optimal cooling Pre-wired for remote on/off switch - RJ11 port Pre-slotted mounting plate Instruction manual Free 1 year tech support 1 Year Warranty Parts and Labor Specifications: Continuous output power: 1250 Watt. Use 150 inline fuse. Surge power capability (peak power): 3100 Watts dc input / operating voltage: 10 to 15 Volts Output voltage: 230 Volts AC Output wave form: modified sine wave Output frequency: 50 Hz Battery low voltage alarm: 10.5 +/- 0.5 Volts Battery low voltage shutdown: 10.0 +/- 0.5 Volts No load current: <.5 Amps Full load efficiency: 90% 1/3 load efficiency: 95% No load minimum operating temperature: -15 degrees Celsius Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown) UK Plug type G 3 prong High input voltage protection: 15V to 17V Low input voltage shutdown: 10V Internal fuse protection Product size (L x W x H): 11.25"X 8.25"X 3" Weight: 5 lbs

AIMS Power 600 Watt Pure Sine Inverter Charger 12V ETL Listed to UL 458 This 600 watt pure sine inverter charger ETL listed and conforms to UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%. It is packed with unique features and it is one of the most advanced inverter chargers in the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. The AC/Battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy applications. When customized to Battery priority mode via a DIP switch, the inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. When switching to battery priority mode via the DIP switch, the inverter will extract power from external power sources in renewable energy systems and a minimal cycle of the battery will be required. With the availability of the auto generator start, an electrical generator can be integrated into the system as a backup and started when the battery voltage goes low. Features: 600 watt low frequency inverter - ETL listed to UL 458 standards 1800 watt surge for 20 seconds 300% surge capability AC Input Cable GFCI outlet Conformal Coated for Marine Applications Multi Stage Smart Charger 20 Amp charges GEL, Lead, AGM, Lithium Remote Panel Available Auto Frequency Detect From AC Input Less than 10msec Typical Transfer Time Selectable 25W power save mode (hibernation) 7 Battery Type Settings for Charger Automatic transfer switch Specifications: Continuous Output Power: 600 Watts Surge Rating: 1800 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 120Vac Nominal Efficiency: 80% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz ± 0.3Hz / 60Hz ± 0.3Hz Typical Transfer Time: 10ms (Max) THD: <10% Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Low Batter Voltage Recover: 13.0Vdc Idle Consumption: <<25W - depending on search mode Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 20A Over Charge Protection Shutdown: 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Bypass - 7amps Low voltage trip: 80\90V +/-4% Low voltage trip: 90@V +/-4% High voltage trip: 140V +/-4% High voltage re engage: 135V +/-4% Max input AC voltage: 150 Dimensions: Unit Weight: 18 lbs. Unit Size L x W x H: 14.75 x 7 x 5.5 inches Shipping Weight: 20 lbs. Shipping L x W x H: 17 x 9.75 x 8.5 inches

AIMS Power 4000 Watt Pure Sine Inverter Charger 12Vdc / 240Vac Input & 120/240Vac Split Phase Output Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If you are looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 220/230/240 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120/240 volts AC. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment. Features: 4000 watt low frequency inverter 12000 watt surge for 20 seconds 300% surge capability 120/240 Vac output split phase(/li> Battery priority selector AC direct connect terminal block Marine coated and protected Multi stage smart charger 115 Amp Charges lithium LiFePO4, gel, AGM and lead batteries. We recommend checking battery charging specifications for all batteries. Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 4000 Watts Surge Rating: 12000 Watts (20 Seconds) Output 120/240 Vac - Split Phase 50 or 60hz Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 F to 122 F (-10 C to 50 C) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm/shutdown: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: 50 Watts Power Saver Mode Idle Consumption: 21 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 115A Over Charge Protection Shutdown 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Transfer Switch Specifications: 40 amp automatic transfer switch 10 ms (max) Dimensions: Unit Weight: 64 lbs. Unit Size L x W x H: 23.5 x 8.5 x 7.0 inches Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75inches

AIMS Power 4000 Watt Pure Sine Inverter Charger 12Vdc to 120Vac Output Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If youre looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120 volts AC. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment. Features: 4000 watt low frequency inverter 12000 watt surge for 20 seconds 300% surge capability Battery priority selector AC direct connect terminal bock for hardwire Marine coated and protected Multi stage smart charger 100 Amp Charges lithium LiFePO4, GEL, AGM and lead batteries. We recommend to check battery charging specifications for all batteries. Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 4000 Watts Surge Rating: 12000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 F to 122 F (-10 C to 50 C) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Shutdown: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: <3.47 amps DC Power Saver Mode Idle Consumption: <0.53 amps DC Charger Specifications: Output voltage: depends on battery type Charger rate: 115A Over charge protection shutdown 15.7V Selectable charge setting based on battery type Adjustable charge current: off-20%-100% Four stage smart charger Transfer Switch Specifications: 40 amp automatic transfer switch 10 ms (max) Dimensions: Unit Weight: 64 lbs. Unit Size L x W x H: 23.5 x 8.75 x 7.10 inches Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.25 x 13.75inches

AIMS Power 4000 Watt Pure Sine Inverter Charger 12Vdc / 120Vac Input & 120/240Vac Split Phase Output Back ordered until 8/1/19 Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If you are looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 2208/230/240 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120/240 volts AC. The inverter also charges at 120 Volts. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment . Features: 4000 watt low frequency inverter 12,000 watt surge for 20 seconds 300% surge capability 120/240 VAC output Split Phase Charges with 120 Vac multi-stage smart charger 115 Amp battery priority selector Charges lithium LiFePO4, gel, AGM and lead batteries. We recommend checking battery charging specifications for all batteries. Direct connect AC terminal block Marine coated and protected Remote panel available auto frequency 10msec typical transfer time optional 25W power save mode 7 battery type settings for charger 7 Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 4000 Watts Surge Rating: 12,000 Watts (20 Seconds) Output 120/240 Vac - Split Phase 60hz Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 F to 122 F (-10 C to 50 C) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low battery Voltage Restart: 15.5Vdc Idle Consumption: 50 Watts Power Saver Mode Idle Consumption: 21 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 115A Over Charge Protection Shutdown 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Transfer Switch Specifications 40 amp automatic transfer switch 10 ms (max) Dimensions: Unit weight: 75 lb Unit size: L x W x H: 31.5 x 8.75 x 7.25 inches Shipping weight: 87 lb Shipping size: L x W x H: 35.5 x 14.50 x 13.50 inches Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75 inches

AIMS Power 3000 Watt Pure Sine Inverter Charger The 3000 watt 12 volt low frequency AIMS Power inverter charger is two products in one. The inverter transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties. It also has a built-in 100 amp battery charger which uses AC power, like from the grid or from a fuel-powered generator, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank. Popular applications for this inverter include: off-grid home or business back up power, providing electricity for a mobile business or mobile office, and running camping equipment. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120 volts AC. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 9000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. Combine this inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. If you are looking for an inverter with similar capabilities but with smaller wattages2000 watt low frequency AIMS Power inverter charger or the 1000 watt low frequency AIMS Power inverter charger. The low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. The marine-coated or conformal-coated boards also make this inverter great for mobile and/or coastal applications, as it protects the product from dust or water vapor that may be present in the air. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. It also features one GFCI power outlet with two receptacles for easy, safe access to the usable AC current, which allow for a peak of 1,500 watts. *Important to remember: the ac outlets have no surge capacity, so you must use the direct connect terminal block to harness the surge capabilities of this inverter. Tools with higher startup surges like a well pumps and air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 3000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. In the event of a power outage, this inverter combined with a battery bank can be used to power a few lights, a refrigerator and perhaps a few other necessities. ***Just always be sure to check the wattage requirements of the appliances being used before powering them with any inverter. *** During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Features: 3000 watt low frequency inverter 9000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 15 amps Marine coated and protected Multi stage smart charger 100 Amp charges gel, AGM, lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Specifications: Inverter Output Specifications: Continuous Output Power: 3000 Watts Surge Rating: 9000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) Bypass Terminal Breaker: 40 amps THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Charger Breaker - 30 amps Idle Consumption: 55 Watts Power Saver Mode Idle Consumption: 21.7 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 100A Dimensions: Unit Weight: 58 lbs. Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches Shipping Weight: 64 lbs. Shipping L x W x H 23.5 x 13.0 x 12.5 inches

AIMS Power 3000 Watt Pure Sine Inverter Charger - ETL Certified Conforms to UL458 Standards AIMS Power 3000 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 3000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 3000 watt inverter charger is capable of a 9000 watt surge for 20 seconds and can run at 3000 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: Listed to UL 458 Standards and CSA 22.2 No 107.1 3000 watt low frequency inverter 9000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20 amps Marine coated and protected Multi stage smart charger 100 Amp GEL, AGM, Lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: Listed to UL 458 Standards Continuous Output Power: 3000 Watts Surge Rating: 9000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass Terminal Breaker - 40 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: 55 Watts Charger Breaker - 30 amps Power Saver Mode Idle Consumption:21.7 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 100A Dimensions: Unit Weight: 58 lbs. Unit Size L x W x H: 15.35 X 11 X 7 inches Shipping Weight: 66 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 2000 Watt Pure Sine Inverter Charger with Transfer Switch The 2000 watt 12 volt low frequency AIMS Power inverter charger transforms DC (direct current) power, stored by batteries, into AC (alternating current) electricity that can be used to run most all tools and appliances. This inverter also has a built in AC-to-DC battery converter charger and transfer switch, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home. This inverter is also available in 24 and 48 volt models. The 2000 watt 24 volt Pure Sine Inverter Charger and 2000 watt 48 volt Pure Sine Inverter Charger are in stock and ready for same-day shipping as well. Use this product for renewable solar, off-grid home and business, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz. It boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank. It is an industrial-grade unit with the ability to withstand surges of up to 6000 watts for 20 seconds, and it achieves this by virtue of its direct connect terminal block. This feature is one of the more sought-after in the inverter industry, allowing users to surpass the 1,500 watt maximum output of a GFCI outlet that would typically be seen on an inverter. This inverter also features a battery-type selector, which helps user regulate the voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan. Use this inverter to power tools on a work truck, as it will run most electric chainsaws, portable grinders, shop vacs, and more. Or use it to power appliances in your RV, as it won't produce any annoying noise or pollution. A low frequency label has been given to this inverter because of the heavy-duty transformer that provides a lowered level of total harmonic distortion (THD) (when compared to modified sine) produced during the DC-to-AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency. It also provides a quieter, nearly inaudible performance. The inverter also has conformal-coated (marine-coated) boards, making it marine-grade and resistant to dust and/or water vapor that may travel through the air and could otherwise be damaging to the unit. This feature is great for boating applications, like powering a stereo system, for instance. Check out the 4000 watt low frequency AIMS Power inverter charger for a comparable unit that can handle the startup surges (up to 12,000 watts for 20 seconds) of tools with larger electrical requirements, such as an air compressor. As with all AIMS Power inverters, the PICOGLF20W12V120V is covered under a 30-day money back guarantee as well as a one year manufacturers warranty and free technical support. Features: 2000 watt low frequency inverter 6000 watt surge for 20 seconds 300% surge capability Battery Priority Selector AC direct connect terminal Block Marine coated and protected Multi stage smart charger 70 Amp for gel, AGM, lead and lithium LiFePO4 GFCI - 15 amps Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 2000 Watts Surge Rating: 6000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass terminal breaker - 30 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low battery Voltage Restart: 13.3Vdc Idle Consumption: 28 Watts Charger Breaker - 20 amps Power Saver Mode Idle Consumption: 12.7 watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 70A Over Charge Protection Shutdown 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Transfer Switch Specifications: 30 amp automatic transfer switch 10 ms (max) Dimensions: Unit Weight: 41 lbs. Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches Shipping Weight: 53 lbs. Shipping L x W x H 23.5 x 13.0 x 12.5 inches

AIMS Power 2000 Watt Pure Sine Inverter Charger- ETL Certified Conforms to UL458 / CSA Standards AIMS Power 2000 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. From off-grid home or business back up power systems to campsites, tailgating parties or solar systems. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1500 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. This inverter charger is capable of a 6000 watt surge for 20 seconds and can run at 2000 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: ETL Listed to UL 458 Standards and CSA 22.2 No 107.1 2000 watt low frequency inverter 6000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20 amps Marine coated and protected Multi stage smart charger 70 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: Listed to UL 458 Standards Continuous Output Power: 2000 Watts Surge Rating: 6000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) Bypass Terminal Breaker - 30 amps THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: 28 watts Charger breaker - 20 amps Power Saver Mode Idle Consumption: <12.7 watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 70A Dimensions: Unit Weight: 47.4 lbs. Unit Size L x W x H: 15.35 x 11 x 7 inches Shipping Weight: 55 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 1500 Watt Pure Sine Inverter Charger AIMS Power 1500 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This inverter is also great in a smaller RV or boat. If 1500 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 1500 watt inverter charger is capable of a 4500 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: 1500 watt low frequency inverter 4500 watt surge for 20 seconds -3x surge capability Battery priority selector Terminal block GFCI - 15 amps Marine coated and protected Multi stage smart charger 50 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 1500 Watts Surge Rating: 4500 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage 100-110-120Vac Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass terminal breaker - 20 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Charger Breaker - 20 amps Idle Consumption: 13.5 Watts Power Saver Mode Idle Consumption: 8 Watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 50A Dimensions: Unit Weight: 33 lbs. Unit Size L x W x H: 14.1 x 8.74 x 7.10 inches Shipping Weight: 42 lbs. Shipping L x W x H 20.75 x 12.75 x 12.5 inches

AIMS Power 1500 Watt Pure Sine Inverter Charger - ETL Certified Conforms to UL458 / CSA Standards AIMS Power 1500 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This inverter is also great in a smaller RV or boat. If 1500 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 1500 watt inverter charger is capable of a 4500 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: Listed to UL 458 Standards and CSA 22.2 No 107.1 1500 watt low frequency inverter 4500 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20amps Marine coated and protected Multi stage smart charger 50 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: Listed to UL 458 Standards Continuous Output Power: 1500 Watts Surge Rating: 4500 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass Terminal Breaker - 20 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low /battery Voltage Restart: 13.0Vdc Idle Consumption: 13.5 watts Charger Breaker - 20 amps Power Saver Mode Idle Consumption: 8 watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 50A Dimensions: Unit Weight: 38 lbs. Unit Size L x W x H: 15.35 x 11 x 7 inches Shipping Weight: 46 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 1000 Watt Pure Sine Inverter Charger - 12 Volt Here is the AIMS Power 1000 Watt Pure Sine Low Frequency Inverter with built-in battery charger. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it to: off-grid home back up power, solar systems, business back-up power, campsites, tailgating parties or any recreational locations. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension chord plugged into your wall outlet at home. This inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1000 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: 1000 watt low frequency inverter 3000 watt surge for 20 seconds 300% surge capability Battery priority selector Terminal block GFCI outlet - 10 amps Marine coated and protected Multi stage smart charger 35 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 1000 Watts Surge Rating: 3000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) Bypass Breaker - 20 amps THD: < 10% DC Ambient operating temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 degree Celcius to 50 degree Celcius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: < 12.5 watts Charger Breaker 10 amps Power Saver Mode Idle Consumption: <7.5 wattsC Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 35A Over Charge Protection Shutdown 15.7V Selectable Charge Setting Dial Adjustable Charge Current: off-20%-100% Four Stage Smart Charger Transfer Switch Specifications: 30 amp auotmatic transfer switch 10 ms (max) Dimensions: Unit Weight: 35 lbs. Unit Size L x W x H: 14.1 x 8.74 x 7.10 inches Shipping Weight: 39 lbs. Shipping L x W x H 20.75 x 12.75 x 12.50 inches

AIMS Power 1000 Watt Pure Sine Inverter Charger - ETL Certified Conforms to UL458 / CSA Standards AIMS Power 1000 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. From home or business back-up power demands to campsites/cabins, tailgating parties or any recreational location. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 1000 watt inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: Listed to UL 458 Standards and CSA 22.2 No 107.1 1000 watt low frequency inverter 3000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20 amps Marine coated and protected Multi stage smart charger 35 Amp for gel, AGM, lead and lithium LiFePO4 batteries Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: ETL listed to UL 458 standards Continuous Output Power: 1000 Watts Surge Rating: 3000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass Breaker - 20 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.0Vdc Idle Consumption: 12.5 watts Charger Breaker - 10 amps Power Saver Mode Idle Consumption: 7.5 watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 35A Dimensions: Unit Weight: 36.5 lbs. Unit Size L x W x H: 15.35 x 11 x 7 inches Shipping Weight: 44 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power Battery Temperature Sensor This is the AIMS Power Battery Temperature Sensor for the Low Frequency Inverters models. This allows careful monitoring of the batteries for extended life and longevity. 32 feet long

AIMS Power 1000 Watt Pure Sine Inverter Charger Hardwire Only This AIMS 1000 Watt pure sine inverter charger features an easy hardwire terminal for AC input and output. Its simple design makes for an easy install and includes all protections and has a selectable battery charger. Perfect for an RV, boat, sump pumps and other applications that use city power and inverter power. Once this inverter is installed, it will automatically go back an forth between city power and inverter power. If city power is lost, the inverter will automatically keep your devices running as long as the inverter has battery power. No frills! Economical and easy to use. Features: 1000 Watt continuous power 2000 Watt surge Selectable 25A or 55A battery charger Built in Transfer Switch 12 Volt DC input Pure sine wave Conformal Coated Circuit Board AC Direct Connect Terminal Block Efficiency: 86% - 90% Over load and Short circuit protection On/off switch Dual cooling fans thermally controlled Instruction manual 1 year tech support 1 Year Warranty Parts and Labor replacement Optional Remote Switch Available (Part# REMOTEHF) Specifications: Continuous output power: 1000 Watts Surge power capability (peak power): 2000 Watts Battery charge current 25A or 55A (optional) AC inverter transfer time: < 20ms DC input / operating voltage: 10-16 Volts AC input voltage range: 120 Volts AC +/- 10% Output voltage: 120 Volts AC Output frequency: 60 Hz Output wave form: pure sine wave (THD < 3%) Over voltage shutdown: 16 +/- 0.5 Volts Battery low voltage alarm: 9.8 +/- 0.3 Volts Battery low voltage shutdown: 9.5 +/- 0.5 Volts Battery overcharge protection voltage: 14.4 Volts Battery float charge voltage: 13.5 Volts Efficiency range: 86% - 90% No load current: 1.2A No load minimum operating temperature: 32 degrees Fahrenheit Unit weight 12.1 LBS Shipping weight 15lbs Unit dimensions 17.25"x9.25"x4"

AIMS Power 1000 Watt Pure Sine Power Inverter European 12 VDC to 220/230 VAC Power inverters have become a staple in businesses and homes around the world due to intermittent brown and black-outs. AIMS Pure Sine Wave Power Inverters provide reliable transformation of DC power from a battery (such as the one in a car or RV) into AC power that can then be used to run lights computers printers televisions medical equipment* and a broad range of appliances. And when it comes to selecting an inverter it is helpful to know that AIMS Pure Sine Wave inverters represent the most technologically advanced lightweight compact and diverse inverters on the market to help ensure the widest use of applications. For over a decade AIMS Power has consistently delivered the broadest range of sizes to accommodate virtually every power requirement. Advantages of a pure sine inverter: Equipment runs more efficiently Motors run cooler Cleaner power Ideal for power tool chargers laser printers electric shavers microwaves variable speed motors TVs medical equipment To select the right inverter, first determine what devices you would need to run in the event of a power outage. Then, select the appropriate inverter that can power the combined wattage requirements of these devices. Please see our tech support section for start up averages for all devices. At AIMS you all discover our inverters range from 75 watts up to 12,000 watts - more than enough to power nearly every application imaginable. Features: 1000W continuous power Pure sine wave USB Port Type C,E & F receptacles On/off switch Over temperature indicator Overload protection Low battery voltage warning/shutdown High input voltage protection with automatic shutdown Over load indicator Short circuit protection Thermally controlled cooling fan AC output short circuit protection Instruction manual Free 1 year tech support 1 Year Warranty Parts and Labor Battery cables not included - 6AWG cables are recommended Specifications: Continuous output power: 1000 Watts Surge power capability (peak power): 2000 Watts DC input / operating voltage: 10 to 15 Volts Output voltage: 220/230 Volts AC +/- 10% Output wave form: pure sine wave Output frequency: 50 Hz Battery low voltage alarm: 10.6 +/- 0.5 Volts Battery low voltage shutdown: 10.0 +/- 0.5 Volts Low battery voltage warning/shutdown No load power consumption: <1.4 dc amps DC amps - 83 . AC amps - 8 Full load efficiency: 90% 1/3 load efficiency: 95% No load minimum operating temperature: 32 degrees F Full load maximum operating temperature: 104 degrees F AC Output Socket Type: Type C,E & F 16 amp USB Output: 5Vdc, max 1A High input voltage protection: 15V Low input voltage shutdown: 10V Internal blade fuse protection Dimensions: Unit Weight: 5.3 lbs. Unit Size L x W x H: 11.53 x 5.51 x 2.91 inches Shipping Weight: 7 lbs. Shipping L x W x H: 18 x 12 x 6 inches

Polk Marine Amplifier w/ Crossover Filters - 5 Channel - 12 Volts - 200 Watts Amplifier with crossover filters boosts the sound quality of your stereo. Built-in low-pass and high-pass filters separate low and high frequencies for higher quality sound with reduced distortion. Compact design is easy to mount in tight spaces. Features: Amplifier boosts the audio output from your source component to the level required to power a speaker 5 Speaker outputs provide up to 5 channels Hook up 4 full-range speakers and a subwoofer to utilize 5 channels Hook up 2 bridged full-range speakers and a subwoofer to utilize 5 channels Crossover filters separate frequencies for higher output capability and reduced distortion High-pass filter only allows high frequencies to pass through Low-pass filter only allows low frequencies to pass through Subsonic filter blocks extremely low frequencies to save energy Remote bass level control Line inputs and outputs provide multiple connection options Inputs allow a CD player or DVD player to be plugged into the amplifier Outputs allow sound to be fed into another amplifier Full-range mode can amplify all frequencies MOSFET power supply produces a higher current output Protection circuit helps defend amplifier from short circuits LEDs indicate power status Efficient Class D amplifier Marine-grade stainless steel hardware Nickel-plated terminals and connectors provide superior signal transfer Compact design is easy to mount almost anywhere CEA-2006 certified Specs: Application: vehicles with 12-volt electrical systems Amplifier class: D Overall dimensions: 13" wide x 1-7/8" tall x 6-3/4" deep Maximum power: At 2 ohms: 4 Channels with 100-watt maximum 1 Channel with 400-watt maximum At 4 ohms: 4 Channels with 70-watt maximum 1 Channel with 200-watt maximum At 4 ohms in bridged mode: 2 Channels with 200-watt maximum 1 Channels with 500-watt maximum Overall frequency response: 20 Hz - 20 kHz High-pass filter: 40 Hz - 400 Hz Low-pass filter: 80 Hz - 4 kHz Load impedance: 2- 4 ohms Signal-to-noise ratio (SNR): 105 dB Wire gauge: 12 AWG 1-Year warranty Note: PAD5000.5 Polk Class-D Power Amplifier - 5 Channel PAD50005

Polk Marine Amplifier w/ Crossover Filters - 4 Channel - 12 Volts - 400 Watts Amplifier with crossover filters boosts the sound quality of your stereo. Built-in low-pass and high-pass filters separate low and high frequencies for higher quality sound with reduced distortion. Compact design is easy to mount in tight spaces. Features: Amplifier boosts the audio output from your source component to the level required to power a speaker 4 Speaker outputs provide up to 4 channels Hook up 4 speakers to utilize 4 channels Hook up 2 speakers and a subwoofer to utilize 3 channels Hook up 2 bridged subwoofers to utilize 2 channels Front and rear level controls Crossover filters separate frequencies for higher output capability and reduced distortion High-pass filter only allows high frequencies to pass through Low-pass filter only allows low frequencies to pass through Line inputs and outputs provide multiple connection options Inputs allow a CD player or DVD player to be plugged into the amplifier Outputs allow sound to be fed into another amplifier Full-range mode can amplify all frequencies MOSFET power supply produces a higher current output Toroidal transformers Protection circuit helps defend amplifier from short circuits LEDs indicate power status Efficient Class D amplifier Marine-grade stainless steel hardware Nickel-plated terminals and connectors provide superior signal transfer Compact design is easy to mount almost anywhere CEA-2006 certified Specs: Application: vehicles with 12-volt electrical systems Amplifier class: D Overall dimensions: 11" wide x 1-7/8" tall x 6-5/8" deep Maximum power: At 2 ohms: 4 Channels with 200-watt maximum At 4 ohms: 4 Channels with 125-watt maximum At 4 ohms in bridged mode: 2 Channels with 400-watt maximum Overall frequency response: 20 Hz - 20 kHz High-pass filter: 20 Hz - 4 Hz Low-pass filter: 50 Hz - 5 kHz Load impedance: 2- 4 ohms Signal-to-noise ratio (SNR): 105 dB Wire gauge: 12 AWG 1-Year warranty Note: PAD4000.4 Polk Class-D Power Amplifier - 4-Channel PAD40004

Polk Audio Class-D Power Amplifier - 1 Channel Features: Polk Class-D power amplifier 1-Channel 1,200 Watts Overall dimensions: 13" wide x 1-7/8" tall x 6-3/4" deep 1-Year warranty

Polk Ultramarine WB/USB/SiriusXM Ready/iPod & iPhone Ready/Bluetooth with App Control The 200 watt PA4A has been designed and engineered with a solid, marine grade construction ensuring it will withstand the harsh elements encountered in a marine environment such as temperature fluctuations and UV and corrosion damage. This high-tech system features a two-piece modular design with a waterproof commander (IPX6) for the helm and hideaway module (IPX5). The commander features a detachable chrome trim ring, silicone rubber face cover and conformal coated circuit boards which prevent damage from high humidity and salt. It also has the capability to be easily integrated with a boat’s digital control panel. Once the two systems are connected, the main control panel is able to perform all of the functions of the PA4A commander. Features: Low-profile flush-mount design with panel and U-bracket fastening options Detachable chrome trim ring for front mounting. Rotary encoder for volume control and menu-driven user interface Dot Matrix LCD with White color backlight readable in direct sunlight 2-Wire power system: 12V DC (Ground and 12V power switched) Non-Volatile Memory: For station presets, audio and user settings Electronic AM/FM Tuner (US/Euro selectable) Station Presets: 18 FM, 12 AM, 18 SAT RBDS w/PTY search NOAA 7-Channel Weather band Bluetooth (A2DP streaming audio ; AVRCP remote control) iPod/iPhone Ready (via. USB) USB 2.0 for Playback of MP3 and WMA audio files SiriusXM Ready (SXV200 tuner) EQ Presets (Flat, Rock, Pop, Classical, User settings) Front and Rear channel RCA Pre-Amp outputs Auxiliary Audio RCA Input Front Panel Commander Water Resistance Rating: IPx6 Tuner / Amp Chassis. Water Resistant Rating: IPx5 ISO Power/ Speaker Connector JDAB Wired Remote ready (PRC100BC/ PRC200BC Low Battery warning: Audible /Visual warning @ < 10.8V Max output power: 50W X4 with MOSFET Power IC Conformal Coated PCB UV Resistant: ASTMD4329 compliant Corrosion Resistant Material/ Finishing ASTMB117 compliant Includes silicone rubber front panel protective cover App Ready (Ultra Marine) Specification: Weight (Lbs): 2.5 Overall Dimensions: No Maximum Power Output (Watts x Channel): 200 Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB): No Mounting Hole Dimensions (Inches WxH): 8.32 x 7.19 App Ready: Yes Mounting Depth (Inches): 2.20 Watertight Standard Compliant: No Conformal Coated PCB: Yes Plastic PCB Insulator: No Chassis: No iPod Ready: Yes SiriusXM Satellite Radio Ready: Yes Wired Remote Control Ready: Yes Wireless Remote Control Ready: No Positive LCD Display: Yes MP3/WMA Playback: Yes AM/FM Tuner: Yes Selectable AM/FM Frequency Spacing US/European: Yes USB Input: Yes Auxiliary Audio Input: Yes Preamp Line Level Outputs: Yes Electronic Disc Skip Protection (Seconds): No Radio Broadcast Data System Text Display: Yes Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND): Yes NOAA Weatherband/Weather Alert: Yes ASTM B117 Salt Spray Exposure Standard Compliant: Yes ASTM D4329 UV Exposure Standard Compliant: Yes

MODELS: OVERLANDER-E | RETREAT-E | URBAN CAMPER-E As your need for power grows, so can your RV solar system by adding additional modules to your existing Solar Kits or even to the Weekender SW and Solar Elite charging system. Each Go Power! expansion kit includes a solar module, mounting hardware and expansion connections to quickly connect to the existing solar module on your RV roof. All Go Power! Solar Expansion kits are compatible with one another - using 80 watts or higher. Go Power! Expansion kits feature MC4 connectors (multi-contact) for serial wiring between our solar kits. This interlocking system allows for a simple installation that is reliable and safe.