LUMITEC

Moray is a reliable, high quality and innovative strip-light. The Moray Flex Light is the only RGBW flex light in the world to have both an internal driver and an internal color/output controller. This means that Moray can be connected directly to a 2-wire DC electrical system, allowing color and dimming control with any standard on/off switch and with no external driver. Moray is the flexible, versatile, reliable solution that reduces cost, time and complexity. And because it’s also compatible with Lumitec's Poco Digital Lighting Control system, Moray can easily be controlled from an MFD, smartphone, or tablet. Features: Flex Light with integrated lighting controller Full-Color RGBW Spectrum 2-wire DC electrical system Flexible and versatile White finish 12 Ft Length Specifications: Amperage: 2.75A (12vDC) Dimensions: 0.65W x 0.65"D x 12'L Material: Engineered PVC Mounting Hardware: Thirteen Plastic Mounting Brackets; Thirteen #6 1/2" SS Screws Type: Utility Light Voltage: 12vDC Warranty: Three years from manufacturer defects Wattage: 33 Watts

Moray is a reliable, high quality and innovative strip-light. The Moray Flex Light is the only RGBW flex light in the world to have both an internal driver and an internal color/output controller. This means that Moray can be connected directly to a 2-wire DC electrical system, allowing color and dimming control with any standard on/off switch and with no external driver. Moray is the flexible, versatile, reliable solution that reduces cost, time and complexity. And because it’s also compatible with Lumitec's Poco Digital Lighting Control system, Moray can easily be controlled from an MFD, smartphone, or tablet. Features: Flex Light with integrated lighting controller Full-Color RGBW Spectrum 2-wire DC electrical system Flexible and versatile White finish 3 Ft Length Specifications: Amperage: 687mA (12vDC) Dimensions: 0.65"W x 0.65"D x 3' L Material: Engineered PVC Mounting Hardware: Four Plastic Mounting Brackets; Four #6 1/2" SS Screws Type: Utility Light Voltage: 12vDC Warranty: Three Years from Manufacturer Defects Wattage: 8.25 Watts

Moray is a reliable, high quality and innovative strip-light. The Moray Flex Light is the only RGBW flex light in the world to have both an internal driver and an internal color/output controller. This means that Moray can be connected directly to a 2-wire DC electrical system, allowing color and dimming control with any standard on/off switch and with no external driver. Moray is the flexible, versatile, reliable solution that reduces cost, time and complexity. And because it’s also compatible with Lumitec's Poco Digital Lighting Control system, Moray can easily be controlled from an MFD, smartphone, or tablet. Features: Flex Light with integrated lighting controller Full-Color RGBW Spectrum 2-wire DC electrical system Flexible and versatile White finish 6 Ft Length Specifications: Amperage: 1.37A (12vDC) Dimensions: 0.65"W x 0.65"D x 6'L Material: Engineered PVC Mounting Hardware: Seven Plastic Mounting Brackets; Seven #6 1/2" SS Screws Type: Utility Light Voltage: 12vDC Warranty: Three years from manufacturer defects Wattage: 16.5 Watts

Moray is a reliable, high quality and innovative strip-light. The Moray Flex Light is the only RGBW flex light in the world to have both an internal driver and an internal color/output controller. This means that Moray can be connected directly to a 2-wire DC electrical system, allowing color and dimming control with any standard on/off switch and with no external driver. Moray is the flexible, versatile, reliable solution that reduces cost, time and complexity. And because it’s also compatible with Lumitec's Poco Digital Lighting Control system, Moray can easily be controlled from an MFD, smartphone, or tablet. Features: Flex Light with integrated lighting controller Full-Color RGBW Spectrum 2-wire DC electrical system Flexible and versatile White finish 9 Ft Length Specifications: Amperage: 2.06A (12vDC) Dimensions: 0.65"W x 0.65"D x 9'L Material: Engineered PVC Mounting Hardware: Ten Plastic Mounting Brackets; Ten #6 1/2" SS Screws Type: Utility Light Voltage: 12vDC Warranty: Three years from manufacturer defects Wattage: 25 Watts

A popular flood light made better. Advances in technology have made it possible for boaters to replace their Halogen flood lights with power sipping LEDs. Lumitec has been a leader in developing LED technology to make it easier for sailors and powerboaters alike to make the switch. Based on the Caprera flood light that has become a popular 55W Halogen flood light replacement light, the Lumitec Caprera2 ups the ante. This bracket mounted deck light provides 50% more light than its predecessor and uses an asymmetrical beam pattern, known as DeckSweep. DeckSweep technology focuses light just where it is needed, in the corners and gunnel to gunnel, so that energy isn’t wasted lighting up the sky or out over the water where there is little benefit. Also new to the Caprera2 is multiple color options. Using Lumitec’s Timed Toggle Protocol (TTP), boaters can fully control the light’s settings with a simple switch. A flick of the switch is all it takes to change from bright White to Blue. The controller is built into the light to simplify installation. The powder-coated Black aluminum housing is designed to dissipate heat to consistently provide the brightest possible light. Increase the amount of usable light flooding the deck while conserving power by switching your existing flood lights to Lumitec Caprera2 LED lights. Features: An improved compact LED bracket mounted flood light 50% more usable light than previous model DeckSweep asymmetrical beam pattern focuses light to where it is needed Dimmable dual colors: White and Blue (dimming requires additional components that are sold separately) TTP technology allow full control of multiple settings using a simple single pole/single throw switch Corrosion resistant power-coated Black aluminum housing is designed to dissipate performance robbing heat Draws 1.3A @ 12V, 600mA @ 24V (up to 80% less power than conventional Halogen lights) Also available with White housing or in a White/Red beam Made in the U.S.A Specifications: Dimensions: 4 1/2" Width x 2" Height x 2 5/8" Depth Amperage: 1.3 Amps Light Output: 1000 Lumens Type: Floodlights Voltage: 24 Volts DC Warranty: Three Year

A popular flood light made better. Advances in technology have made it possible for boaters to replace their Halogen flood lights with power sipping LED lighting. Lumitec has been a leader in developing LED technology to make it easier for sailors and powerboaters alike to make the switch. Based on the Caprera flood light that has become a popular 55W Halogen flood light replacement light, the Lumitec Caprera2 ups the ante. This bracket mounted deck light provides 50% more light than its predecessor and uses an asymmetrical beam pattern, known as DeckSweep. DeckSweep technology focuses light just where it is needed, in the corners and gunnel to gunnel, so that energy isn’t wasted lighting up the sky or out over the water where there is little benefit. Also new to the Caprera2 is multiple color options. Using Lumitec’s Timed Toggle Protocol (TTP), boaters can fully control the light’s settings with a simple switch. A flick of the switch is all it takes to change from bright White to Blue. The controller is built into the light to simplify installation. The powder-coated White aluminum housing is designed to dissipate heat to consistently provide the brightest possible light. Increase the amount of usable light flooding the deck while conserving power by switching your existing flood lights to Lumitec Caprera2 LED lights. Features: An improved compact LED bracket mounted flood light 50% more usable light than previous model Deck Sweep asymmetrical beam pattern focuses light to where it is needed Dimmable dual colors: White and Blue (dimming requires additional components that are sold separately) TTP technology allow full control of multiple settings using a simple single pole/single throw switch Corrosion resistant power-coated White aluminum housing is designed to dissipate performance robbing heat Draws 1.3A @ 12V, 600mA @ 24V (up to 80% less power than conventional Halogen lights) Also available with Black housing or in a White/Red beam Made in the U.S.A Water Resistant Specifications: Dimensions: 4 1/2" Width x 2 7/8" Height x 2" Length Amperage: 1.3 Amps Light Output: 1000 Lumens Mounting Hardware: Mounting Hardware (Included) Type: Floodlights Voltage: 24 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship

The Caprera2 Bracket Mount LED Floodlight is a bright, rugged and low-amperage replacement for 55W Halogen lights. Small size (70% smaller than comparable lights) and low power consumption (80% less current draw than a 55W Halogen) have made them popular among top-tier boatbuilders. Completely sealed and IP67 compliant, with an expected output life of more than 22,000 hours. Caprera2 models produce 1,000 lumens. Powdercoated die-cast aluminum housing is salt-spray tested to 3000 hours (built to ASTM B117 standards). Features: Light Style: Deck Floodlight Specifications: Case Color: White Light Color: White/Red Dimensions: 1 3/4" Width x 1 1/4" Depth x 4 15/16" Length Material: Plastic Amperage: 12 Volts DC/1.3 Amps Light Output: 1000 Lumens Draw: 1.3A@12V; .6A@24V Mounting Hardware: Mounting Hardware (Included) Mounting Hardware: Included/Required: 1/4-20 x 1 1/4"L stainless-steel (included) Type: Floodlights Voltage: 24 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship Wattage: 16 Watts

Building on the huge success of the Caprera line of spreader lights Lumitec is introducing the all-new Caprera3 series. Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern. But the innovation doesn’t stop there, Caprera3 is available with a full-color spectrum RGBW output for infinite color selection options. IP67 compliant and PLI enabled (Poco compatible) on many models. Features: Spectrum RGBW Color Output IP67 compliant PLI Enabled: Yes Bracket Mounting Housing Color: White Specifications: Dimensions: 3.79" W x 1.1" H x 2.49" D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Mounting Hardware: One 1/4"-20 x 1.125", Fully Thd Hex Hd 316SS (Included); Nylon Locknut 1/4"-20 x 7/16W x 5/16 tall (Included) Type: Floodlight (Bracket Mount) Voltage: 10-30vDC Warranty: Three years from manufacturer defect

LUMITEC Caprera3 Spreader Floodlight, White Only Color Output, Dimming Building on the huge success of the Caprera line of spreader lights Lumitec is introducing the all-new Caprera3 series. Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern. But the innovation doesn’t stop there, Caprera3 is available with a full-color spectrum RGBW output for infinite color selection options. IP67 compliant and PLI enabled (Poco compatible) on many models. Features: White Only Color Output, Dimming IP67 compliant PLI Enabled: No Bracket Mounting Housing Color: White Specifications: Dimensions: 3.79" W x 1.1" H x 2.49" D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Mounting Hardware: One 1/4"-20 x 1.125", Fully Thd Hex Hd 316SS (Included); Nylon Locknut 1/4"-20 x 7/16W x 5/16 tall (Included) Type: Floodlight (Bracket Mount) Voltage: 10-30vDC Warranty: Three Years from Manufacturer Defect

Building on the huge success of the Caprera line of spreader lights Lumitec is introducing the all-new Caprera3 series. Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern. But the innovation doesn’t stop there, Caprera3 is available with a full-color spectrum RGBW output for infinite color selection options. IP67 compliant and PLI enabled (Poco compatible) on many models. Features: White/Blue Color Output, Dimming IP67 compliant PLI Enabled: Yes Bracket Mounting Housing Color: White Specifications: Dimensions: 3.79" W x 1.1" H x 2.49" D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Mounting Hardware: One 1/4"-20 x 1.125", Fully Thd Hex Hd 316SS (Included); Nylon Locknut 1/4"-20 x 7/16W x 5/16 tall (Included) Type: Floodlight (Bracket Mount) Voltage: 10-30vDC Warranty: Three Years from Manufacturer Defect

The Capri Flush-Mount LED Floodlight is a bright and rugged replacement for 55W Halogen lights . Small size (70% smaller than comparable lights) and low power consumption (80% less current draw than a 55W Halogen) have made them popular among top-tier boatbuilders. Completely sealed and IP67 compliant, with an expected output life of more than 22,000 hours. Features: Capri models produce 530 lumens of light Powdercoated die-cast aluminum housing is salt-spray tested to 3000 hours (built to ASTM B117 standards) Light Style: Deck Floodlight Mounting Hardware: Included/Required: #6 self-tapping stainless-steel (included) Water Resistant Specifications: Dimensions: 4 15/16" Width x 1 1/4" Height x 1 3/4" Length Amperage: 12 Volts DC/900m Amps Light Output: 530 Lumens Mounting Hardware: Mounting Hardware (Included) Type: Floodlights Voltage: 12 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship

Building on the huge success of the Capri line of spreader lights Lumitec is introducing the all-new Capri3 series. Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern, and for the first time available in full-color Spectrum RGBW output. But the innovation doesn’t stop there; Capri3 has Lumitec's innovative easy fit butterfly clip mounting system to greatly simplify the installation process with no exposed fasteners. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on all but the single color non dimming white model. Features: Spectrum RGBW Color Output IP67 compliant PLI Enabled: Yes Butterfly Clip Mounting Housing Color: White Specifications: Dimensions: 4.08" W x 1.39" H x 1.43" D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Mounting Hardware: Spring-Torsion-302SS Passivated-6 coils .75" arm (Included) Type: Floodlight (Flush Mount) Voltage: 10-30vDC Warranty: Three years from manufacturer defect

LUMITEC Capri3 Spreader Floodlight, White Only Color Output, Dimming Building on the huge success of the Capri line of spreader lights Lumitec is introducing the all-new Capri3 series. Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern, and for the first time available in full-color Spectrum RGBW output. But the innovation doesn’t stop there; Capri3 has Lumitec's innovative easy fit butterfly clip mounting system to greatly simplify the installation process with no exposed fasteners. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on all but the single color non dimming white model. Features: White Only Color Output, Dimming IP67 compliant PLI Enabled: Yes Butterfly Clip Mounting Housing Color: White Specifications: Dimensions: 4.08" W x 1.39" H x 1.43" D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Mounting Hardware: Spring-Torsion-302SS Passivated-6 coils .75" arm (Included) Type: Floodlight (Flush Mount) Voltage: 10-30vDC Warranty: Three Years from Manufacturer Defect

Building on the huge success of the Capri line of spreader lights Lumitec is introducing the all-new Capri3 series. Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern, and for the first time available in full-color Spectrum RGBW output. But the innovation doesn’t stop there; Capri3 has Lumitec's innovative easy fit butterfly clip mounting system to greatly simplify the installation process with no exposed fasteners. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on all but the single color non dimming white model. Features: White/Blue Color Output, Dimming IP67 compliant PLI Enabled: Yes Butterfly Clip Mounting Specifications: Housing Color: White Dimensions: 4.08" W x 1.39" H x 1.43" D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Mounting Hardware: Spring-Torsion-302SS Passivated-6 coils .75" arm (Included) Type: Floodlight (Flush Mount) Voltage: 10-30 vDC Warranty: Three Years from Manufacturer Defect

For retrofit and new applications where a molded-in pocket is not possible or practical, Lumitec offers these surface mount navigation lights. Clean styling and unmatched reliability. Choose classic aluminum half-round design for mounting to vertical surfaces. U.S. Coast Guard approved 2nm. Features: U.S. Coast Guard Compliant Conforms to ABYC A16 Standard Meets USCG requirements: 0-50 meters vessels Specifications: Color: Red with Aluminum Silver Housing Compatibility: Vessels Up to 50M Dimensions: 3.6"W x 1"H x 2.2"D Material: Anodized Aluminum Mount Type: Deck Mounts Type: Port Visibility: 2 Nautical Mile Voltage: 10-30vDC Warranty: Three years from manufacturer defects Wattage: 0.35 Watts

For retrofit and new applications where a molded-in pocket is not possible or practical, Lumitec offers these surface mount navigation lights. Clean styling and unmatched reliability. Choose classic aluminum half-round design for mounting to vertical surfaces. U.S. Coast Guard approved 2nm. Features: U.S. Coast Guard Compliant Conforms to ABYC A16 Standard Meets USCG requirements: 0-50 meters vessels Specifications: Color: Green with Aluminum Silver Housing Compatibility: Vessels Up to 50M Dimensions: 3.6"W x 1"H x 2.2"D Material: Anodized Aluminum Mount Type: Deck Mounts Type: Starboard Visibility: 2 Nautical Mile Voltage: 10-30vDC Warranty: Three years from manufacturer defects Wattage: 0.35 Watts

Sleek, clean and powerful, the Corsica Flood Light is Lumitec's newest addition to the mold-in Contour series. Corsica's design allows it to be sculpted into hardtops, wheelhouses or arches for cohesive and integrated look. Corsica delivers more than 1,200 darkness piercing lumens and is the first light to feature the all new Spectrum Halo. Spectrum Halo casts an even, dimmable, colored glow while enhancing a vessel's nightime aesthetics. TTP and PLI enabled, Corsica can be controlled with any normal on/off switch and is also compatible with Lumitec's POCO Digital Lighting Control System. Features: Color Output: White with spectrum halo White housing Specifications: Dimensions: 5.76"W x 2.8"H x 4.1"D Amperage: 1A (12vDC) & 0.5A (24vDC) Light Output: 1200 Lumens Material: Aluminum Mounting Hardware: Snap-in Mounting Base Type: Floodlight Voltage: 10-30vDC Warranty: Three years from manufacturer defects Wattage: 12 Watts

For applications where durability, reliability and performance are non-negotiable demands, Lumitec designed Diesel. Originally developed for continuous duty on workboats and supply barges, Diesel is proving its mettle on everything from swamp buggies to forklifts to off-road vehicles. Completely sealed (IP67), exceptionally bright (1,000+ lumens) and, like all Lumitec products, proudly made in the USA. Features: Waterproof Specifications: Dimensions: 5 1/2' Width x 2 3/4" Height x 4" Depth Amperage: 1.3 Amps (12 Volts DC); 600mA (24 Volts DC) Light Output: 1000 Lumens Mounting Hardware: 4 #10 x 1 1/4" Screws & 4 Nylon Shoulder Washers (included) Type: Floodlight Voltage: 10-30 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship

Lumitec’s newly enhanced General Area Illumination (GAI) light now has twice the output and a new, more efficient optical system! GAI’s small size, high output and heavy-duty machining aluminum base make this light perfect for a wide range of applications: reading light, task light or even a work space light. Completely sealed and IP67 compliant. Features: Waterproof Specifications: Amperage: 400 mA (12 Volts DC); 200mA (24 Volts DC) Dimensions: 1 1/2" Diameter x 2 1/2" Height Light Output: 333 Lumens Mounting Hardware: 3 #6x3/4" Screws and 3 washers (Included) Type: Positionable Lights Voltage: 10-30 Volts DC Warranty: Three Years from Manufacturer Defects

LUMITEC LIGHTING Ibiza LED Engine Room Light is as beautiful as it is brilliant. You may be surprised that Ibiza is tough enough for an engine room, but it is and it's just as bright, reliable and easy to install as it's sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens, Ibiza is IP67 compliant, completely sealed and compatible with most PWN LED dimmers. And like Nevis, Ibiza's carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Dimensions: 9" Width X 2' Height X 1" Depth Amperage: 1.3 Amps 12 Volts DC, 600mA 24 Volts DC Color: White, Red Material: Aluminum Light Output: 1000 Lumens Mounting Hardware: Two #6 x 1.25" 18-8 SS Chrome Plated Screws, 2 C-Sink Washers Type: Utility/Engine Light Voltage: 10-30 Volts DC Warranty: Three Years from Manufacturer Defects

From the world’s top custom yacht builders to the US Coast Guard, customers with high expectations have relied on Lumitec's Maxillume line of flood lights for nearly a decade. New for 2016, Lumitec introduces Maxillume h60. Packing more than 6,000 TRUE lumens, the Maxillume h60 boasts twice the output of previous models; new mounting options; and a tried-and-true internal dimmer control. Each light is designed, hand assembled, and tested at Lumitec's USA manufacturing facility. Features: Water Resistant Specifications: Amperage: 5 Amps (12 Volts DC); 2.5 Amps (24 Volts DC) Dimensions: 2 3/4" Height x 8 1/4" Width x 2 1/4" Depth Light Output: 6000 Lumens Mounting Hardware: Sold Separately Type: Floodlights Voltage: 10-30 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship

From the world’s top custom yacht builders to the US Coast Guard, customers with high expectations have relied on Lumitec’s Maxillume line of flood lights for nearly a decade. New for 2016, Lumitec introduces Maxillume h60. Packing more than 6,000 TRUE lumens, the Maxillume h60 boasts twice the output of previous models; new mounting options; and a tried-and-true internal dimmer control. Each light is designed, hand assembled, and tested at Lumitec's USA manufacturing facility. Features: Water Resistant Specifications: Amperage: 5 Amps (12 Volts DC); 2.5 Amps (24 Volts DC) Dimensions: 3 1/4" Height x 8 1/4" Width x 1 1/2" Depth Light Output: 6000 Lumens Mounting Hardware: Sold Separately Type: Floodlights Voltage: 10-30 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship

From the world’s top custom yacht builders to the US Coast Guard, customers with high expectations have relied on Lumitec's Maxillume line of flood lights for nearly a decade. New for 2016, Lumitec introduces Maxillume h60. Packing more than 6,000 true lumens, the Maxillume h60 boasts twice the output of previous models; new mounting options; and a tried-and-true internal dimmer control. Each light is designed, hand assembled, and tested at Lumitec's USA manufacturing facility. Features: Water Resistant Specifications: Amperage: 5 Amps (12 Volts DC); 2.5 Amps (24 Volts DC) Dimensions: 3 1/4" Height x 8 1/4" Width x 1 1/2" Depth Light Output: 6000 Lumens Mounting Hardware: Sold Separately Type: Floodlights Voltage: 10-30 Volts DC Warranty: Three Year Limited Warranty Covering Materials & Workmanship