The MM-AE Series inverter is smaller, lighter and less expensive while retaining all the built in protection and reliability of ME and MS models. The built in chargers for the MM-AE Series use a PFC (Power Factor Corrected) charger, which is 85% efficient and the same charger topology used in all Magnum charger models.
The MM-AE Series is designed to accommodate smaller loads and appliances in cabins and off-grid homes.
Part Number: MM1524-AEInverter Specifications:
- Input battery voltage range: 18 to 32 VDC
- Nominal AC output voltage: 120 VAC ± 5%
- Output frequency and accuracy: 60 Hz ± 0.005%
- 1 msec surge current (amps AC): 45
- 100 msec surge current (amps AC): 24
- 5 sec surge power (real watts): 2650
- 10 sec surge power (real watts): 2575
- 30 sec surge power (real watts): 2500
- 5 min surge power (real watts): 2350
- 30 min surge power (real watts): 1900
- Continuous power output at 25° C (with 1.0 PF): 1500 VA
- Continuous current output: 13 AAC
- Rated input battery current: 70 ADC
- Inverter efficiency (peak): 91%
- Transfer time: 16 msecs
- Search mode: .12
- No load (120 VAC output): .63 ADC
- Waveform: Modified Sine Wave
- Continuous output at 25° C: 35 ADC
- Charger efficiency: 88%
- Power factor: > 0.95
- Input current at rated output (AC amps): 9
- Transfer relay capability: 20 AAC
- Battery temperature compensation: Yes, standard temp sensor
- Remote available (optional): Yes, MM-RC or ME-RC
- Internal cooling: 0 to 59 cfm variable speed
- Over current protection: Yes, with two overlapping circuits
- Over temperature protection: Yes on transformer and MOSFETS
- On/Off with status indicator: Yes, front mounted
- Low battery cutout: 10 or 20 VDC, adjustable on most models with the ME-RC remote
- AC output and input: Hardwire
- Output circuit breaker: 12 A switchable
- Input circuit breaker: 16 A
- Warranty: Two years
- Dimensions (l x w x h): 16.6 x 8.4 x 4.7
- Mounting: Shelf (top or bottom up) or wall (vents up)
- Weight: 20 lb (9 kg)
- Max operating altitude: 15,000 (4570 m)
- Construction: ABS plastic top and cast aluminum bottom